Loading...
HomeMy WebLinkAboutOrdinances_2462_CCv0001.pdf ORDINANCE NO. 2462 AN ORDINANCE OF THE CITY OF REDLANDS AMENDING CHAPTER 15.36 OF THE REDLANDS MUNICIPAL CODE BY ADOPTING ZONING ORDINANCE TEXT AMENDMENT NO. 272 RELATING TO SUBDIVISION IDENTIFICATION SIGNS BE IT ORDAINED BY THE CITY COUNCIL OF THE CITY OF REDLANDS AS FOLLOWS: SECTION ONE: That the Redlands Municipal Code be amended by adding Section 15.36.305 as shown in Exhibit "A" attached. SECTION TWO: The Mayor shall sign this ordinance and the City Clerk shall certify to the adoption of this ordinance and shall cause it, or a summary of it, to be published once in the Redlands Daily Facts, a newspaper of general circulation within the City, and thereafter, this ordinance shall take effect in accordance with law. Mayor of the City of Redlands ATTEST: Cit Jerk I, Lorrie Poyzer, City Clerk, City of Redlands, hereby certify that the foregoing ordinance was duly adopted by the City Council at a regular meeting thereof held on the 16th day of January , 2001, by the following vote. AYES: Councilmembers George, Freedman, Haws, Peppier Mayor Gilbreath NOES: None ABSENT: None City Cle EXHIBIT A 45.36.305 Identification signs for single family residential districts. Single family residential subdivisions may be permitted the use of subdivision identification signs containing the name of the development only, subject to the following provisions: A. Single family residential subdivisions containing a minimum of fifty (50) units may be permitted subdivision identification signs at primary entrances to the development with a maximum sign area of twenty (20) square feet per face. The proposed signs at primary entrances may be located on both sides of the street. Any one development may have a maximum of two primary entrances with subdivision identification signs. B. The identification signs adjacent to each primary entrance shall be incorporated into a monumentation style structure, constructed of decorative block/brick and or similar material, be located behind the corner cut-off area, and have a maximum height of six(6)feet. Signs with a maximum height of three(3)feet may be located within the corner cut-off area. C. Additional subdivision identification signs with a maximum height of six(6)feet may be permitted adjacent to all secondary entrances to the development provided they are located behind the corner cut-off area, and have a maximum height of six (6) feet. The actual sign face shall not exceed five (5) square feet. Signs with a maximum height of three (3) feet may be located within the corner cut-off area. D. All subdivision signs, if lighted, shall be externally illuminated and all lighting shall be directed away from the street and adjacent properties. E. Height of all signs shall be measured from the adjacent grade elevation. F. All subdivision identification signs shall be subject to Planning Commission review and approval prior to installation. This shall be accomplished through a Commission Sign Review procedure. G. An entity, such as a homeowner's association or a landscape and lighting district, shall be formed, empowered, and required to maintain all permitted subdivision identification signs. ORDINANCE NO. 2462